BASIC POLYMER / RAPID HYDRATION POLYMERS
CHEMICAL -PHYSICAL CHARACTERISTICS
| Physical state |
white Granules powder |
| Charge |
Anionic |
| Density |
0.980 - 1.060 gr/crn3 |
PROPERTIES - APPLICATIONS
Relemac VISCOMUD are synthetic organic Polymers of high molecular weight and varying Anionicity degree supplied as rapidly hydrating emulsions.
Relemac VISCOMUD are designed for use in water based fluid additives within the Oil & Gas industry. They can be used in a variety of well types such as oil, gas, water and injection Wells. Relemac VISCOMUD enhance the removal of drilled solids, provides excellent friction Reduction and foam stabilization in air drilling projects. Thus, we are counted amongst the eminent white granular powder suppliers in New Delhi.
The main function of Relemac VISCOMUD included providing Hydrostatic pressure to prevent formation Fluids from entering into the well bore, keeping the drill bit cool and clean during drilling, carrying out drill cutting, and suspending the drill cutting while drilling is paused and when the drilling assembly is brought in and out the hole, the drilling fluids used for a particular job is selected to avoid formation damage and to limit corrosion.
Relemac VISCOMUD provides exceptional performance in freshwater / low brine and extremely high brine fluid Conditions.
Product Benefits
- Highly effective friction reducer and viscosifier
- Excellent foam stabilizer for air drilling
- Highly effective shale and hole stabilizer
- Rapid hydration properties
FEEDING - DOSAGE.
Relemac VISCOMUD dosage will depend on the system operating conditions, application
Methods and specific viscosity requirements.
We Relemac India strongly recommend to use product as per guidance of Relemac India Ground engineer
For guidance, the following dosages can be considered:
Fresh mix 1 kg per L3
@PH 11.5 +
It is very important that the flocculants is added at a point of turbulence to insure proper mixmg.
PACKAGING - STORAGE
Relemac VISCOMUD are supplied in 25 kg Bag. The product must be kept dry and at room temperature. If stored correctly, it remains stable For moe then 6 months.
Avoide water contact while storage
HEALTH - SAFETY
Avoid contact with skin and eyes; follow the industrial hygiene norms. Solutions are very Slippery: avoid spilling.
INFORMATIVE NOTE
The information and technical data contained in this bulletin are based on our own most updated knowledge and experiences; however they do not amount to a guarantee. Our Technical Department Is at your disposal for further studies and will give its direct assistance for the use of our products, whenever needed.
Back to Products Enquiry
